Home > Products > Gasketed Plate Heat ... > GPHE B100B (Gasketed...
|
GPHE B100B (Gasketed Plate Heat Exchanger)
Yuanzhuo Equipment Sells Various Types Of Gasketed Plate Heat Exchanger, Developed YOJO Gasketed Plate Heat Exchanger,launching GPHE B100B
Online ConsultationDescription
The detachable plate heat exchanger is made up of many stamped corrugated thin plates at certain intervals, sealed by gaskets around them, and overlapping and compressed with frames and compression screws. The four corner holes of the plates and gaskets form the separation of the fluid. The piping and collecting pipes also reasonably separate the hot and cold fluids so that they flow in the flow channels on both sides of each plate, and heat exchange occurs through the plates.
Features of detachable plate heat exchangers
2. High flexibility: The detachable plate heat exchanger can add or reduce plates as needed to adapt to different heat exchange needs.
3. High efficiency: The gaps between the plates of the detachable plate heat exchanger are very small, which can achieve efficient heat transfer and improve heat exchange efficiency.
4. Save space: The detachable plate heat exchanger has a compact structure and takes up little space, making it suitable for occasions with limited space.
5. Strong corrosion resistance: The plates of detachable plate heat exchangers are usually made of corrosion-resistant materials such as stainless steel or titanium alloy, and can be used in corrosive media for a long time.
|
Model |
A(mm) |
B(mm) |
C(mm) |
D(mm) |
E(mm) |
|
B100B |
N(2.55+X) |
470 |
255 |
1069 |
719 |
|
The bottom of the center to ground level (mm) |
183 |
|
MAX.LC (mm) |
1600 |
|
Connection (mm) |
100 |
|
Maximum flow (m3/h) |
140 |
|
Design pressure (MPa) |
1.0/1.6/2.5 |
|
Max. number of plates |
278 |
|
Plate Material |
Suitable Fluid |
|
Stainless steel (SUS304, 316L etc.) |
Pure water, River water, Edible salt water, Mineral oil |
|
Titanium, Ti-pd |
Brine, sea water, Salt water |
|
SMO254 |
Dilute sulphuric acid, Salt water solution, Inorganic aqueous solution |
|
Ni |
High temperature, High concentration of caustic soda |
|
Hastelloy (C276, C22) |
Concentrated sulfuric acid, Hydrochloric acid, Phosphoric acid |
|
Main Body Gasket |
Operating Temperature (℃) |
Suitable Fluid |
|
NBR |
-15 ~ +135 |
Water, Sea water, Mineral Salt, Brine |
|
EPDM |
-25 ~ +180 |
Hot water, Vapour, Acid, Base |
|
F26 |
-25 ~ +230 |
Acid, Base, Fluid |
|
FTP |
0 ~ +160 |
Concentrated acid, Base, High temperature oil, Vapour |
|
Plate Type |
Application |
|
Lower Runner (B) |
Temperature drop of heat-transfer medium too large, Temperature difference of logarithm too small |
|
High Runner (H) |
Request of viscosity, Fibroid, Pressure drop too small |
Online Consultation
- Please input Name *
- TelephoneNumber divat error
- Please input E-mail *
- Please input Code
-
