8 major components of brazed plate heat exchanger

Source: 　 Time: 2020-03-17 11:52:37　Hit:

There are two types of plate heat exchangers: frame (removable) and brazed. Among them, brazed plate heat exchangers can be divided into fusion brazed plate heat exchangers and nickel brazed plate heat exchangers.There are three types of plate heat exchanger plates: herringbone corrugated plate, horizontal straight corrugated plate and knob plate.

Next, Yuanzhuo introduces the 8 parts of the main structure of the brazed heat exchanger.

1. Plate heat exchanger plate

2. Plate heat exchanger sealing gasket

3. fixed compression plate

4. movable compression plate

5. Clamping bolt

6. upper guide

7. lower guide

8. rear pillar

The plate heat exchanger consists of a group of plates stacked into a plate package with a channel pattern. Both ends are configured with end plates with takeovers.The whole machine is made by vacuum brazing. Adjacent channels respectively flow two media. The plates between adjacent channels are pressed into a corrugated pattern to strengthen the heat exchange between the two media.In a brazed plate heat exchanger for refrigeration, there is always one more water channel than the refrigerant channel.All plate heat exchangers are screw and bolt structures, which are easy to disassemble and repair on site. Some heat exchangers are made diagonal flow, that is, Q1 and Q3 accommodate one medium, and Q2 and Q4 accommodate another medium.

The above is the introduction of the basic structure of plate heat exchangers. YOJO plate heat exchangers are the heat exchangers that we mainly produce and sell. YOJO has gradually been understood by people at home and abroad. We provide detailed plate heat exchanger models and Parameters, you can visit our product page to learn more.

tags: Plate heat exchanger structure, plate heat exchanger composition, plate heat exchanger half piece, YOJO plate heat exchanger

• Previous：Plate heat exchanger flow channel type
• Next：heat exchanger how it works