Home > News > Components of a plat...
Components of a plate heat exchanger
Source: Time: 2020-04-13 18:09:04 Hit:
The use composition of the plate heat exchanger is mainly two parts, one part is mainly composed of the frame, so that the plate heat exchanger can be stably fixed, and the second is the plate, which plays a corresponding role for its heat exchange effect.
Plate heat exchanger plate:
The thin plate made of various materials is pressed into various corrugations with various forms of abrasive tools, and corner holes are opened at the four corners of the plate. It is used for the flow path of the medium and the plate. The periphery and corner holes are sealed with rubber gaskets
Plate heat exchanger frame:
The frame is composed of a fixed compression plate, a movable compression plate, upper and lower guide rods and clamping bolts. The plate heat exchanger is to install plates in the form of superposition in the middle of the fixed compression plate and the movable compression plate, and then use the clamp Tightened bolt clamp. Thin rectangular channels are formed between various plates, and heat exchange is performed through half plates.
Compared with conventional shell and tube heat exchangers, under the same flow resistance and pump power consumption, the heat transfer coefficient is much higher, and there is a tendency to replace shell and tube heat exchangers in the applicable range.
Yuanzhuo equipment is referred to as YOJO for short, which is one of the most advanced plate heat exchanger technology manufacturers in Jiangsu Province, China. Production of various types of plate heat exchangers, mainly coaxial heat exchangers, brazed plates, fusion brazed plates and gasket plate heat exchangers. In particular, YOJO fusion brazed plate heat exchangers, launched similar to AlfaNova brand heat exchangers, are only made of 100% stainless steel materials, and the product quality is first-class.
Tag: Jiangsu heat exchanger, YOJO fusion brazed plate heat exchanger
